Sunday, August 5, 2012

Hobby Basics - Glues

A jungle of glues
As promised I will do a complete series of Hobby Basics and here comes the next part, this time I will talk about glues. Every now and then you read on the tabletop forums questions about which glue is the best and what do you use for terrain and so on and so on. Since there is a broad selection on the market and you can nearly buy one glue for one task, this is now a jungle where you can get lost. That's why I will talk a bit about the glues that work for me.

White/Wood/PVA glue

The classics for terrain or base making. I have different kinds of white glue because I like to have different levels of thinning and don't want to mix this stuff everytime I use it. I have a roughly thinned one in my bottle which I use mostly for basing. I like the flow on smaller areas and how you can spread it with a brush. Then I have a big bucket with only some drops of water in it. This I use for terrain making like on my modular gaming board. Through its thickness the basing material sticks much better to the surface which is needed for played terrain (with bases this would only cause the miniature to "sink" into the sand).
As you can see I only use white glue from sone well known manufacturers. I tried out some cheap stuff from the one euro/dollar store but this stuff is even more diluted than my selfmade micture. Which means this is total crap. Perhaps you are lucky and get some better stuff but for me this will not be an option anymore.

White/Wood/PVA glue in different sizes
White/Wood/PVA glue in different sizes

Monday, July 30, 2012

Hobby Basics - Tools

"Oh nooooooes, another boring of these: use this and that tool! babbling" you may think now. But as not all my readers and hobbiest in general are pros and have years of experience in miniature painting or terrain crafting, I will do a short(?) series of the tools I (!) use. I will give no advices to buy this or that, I will just give a statements of the experiences I made (or make) with the mentioned tools.. Hope you will like it though.

Pliers 

Often needed and a long time not in my toolbox: Pliers! I don't use any fancy and expansive pliers. I bought a small set of fine mechanics pliers in the hardware store and am pretty happy with them. I didn't want one for all, I wanted one for cutting out the miniatures from sprues, one for bending miniatures, wire and so on. I think they went over the tray for arround 6€ so not really expensive and something I couldn't hardly go wrong with.

A set of small pliers
A set of small pliers

Sunday, July 29, 2012

Descent - Journeys in the Dark | Miniatures

As promised I made today some pictures of the miniatures of the boardgame Descent - Journeys in the Dark which I reviewed not long ago. Since there are so many miniatures I didn't set up my photobucket I just arranged them on my cutting mat and did some short photo shooting. If you want any of the miniatures in close up, please state so in the comments, I will then do a in deep coverage of them.

I'll be starting with the different sets of heroes. I tried to make some closeups but my camera played me some tricks, therefore only a group photo:

All of the heroes for Descent
All of the heroes for Descent

Saturday, July 28, 2012

Review - Warhammer Battle Magic

Hey there, since I have shaky hands at the moment (fever and outer temperatures of arround 35°C aren't a good combination), I can't paint and concentrate on doing some reviews of stuff that arrived in the last few weeks. I'll start with the Warhammer Battle Magic cards from Games Workshop.
For the older of us, not to be mistaken with the old Battle Magic of the fourth edition :) 

Warhammer Battle Magic cards
Warhammer Battle Magic cards

Thursday, July 26, 2012

Long time, no see - Distractions, Progress and Summer Flu

Hey girls and guys, sorry for being on the slow lane at the moment. First I had a day off and celebrated my birthday in the biggest funpark here. On top of that I had the last days a training course which was very interesting but really much information and input for my working life. Then my computer nearly crashed after buying ind installing a new graphic card and last but not least my wife and I cought a summer flu. Fever at now 30 - 34°C is not really funny.

But nonetheless I made some small progress with my stuff. As stated in one of my last articles I want to rebase my old models from the nineties. While I was at this task, I also made me a base for my warp lightning cannon and a testbase for some unit filler or multibase. Its nothing special or fancy, I just wanted to show you some progress.

Rebased some old skaven
Rebased some old stuff

Friday, July 20, 2012

Save our oceans

Hi guys and girls who read my blog. Today I will write something completely out of context of miniatures or our hobby. I will write something about protecting our oceans and the wildlife within. As I am a scuba diver and therefore very interested in everything related to nature (not only our oceans) it is a deep urge to protect our environment where I can.

Save our oceans

Sunday, July 15, 2012

HowTo: Building a tower - Part 3

After building and painting the core for my tower, it is time to build the upper level of it. Somewhere the guards or other inhabitants must live.

First I built a core of styrofoam which diamater was a little bigger than the stone structure. Then I glued everything on the top of my stoneworks and let everything really dry. Meanwhile I sorted and cut my wooden "swizzle sticks" into the same length. You need more than you think, I had to borough some of my friend. Lucky enough you get them for free in every fast food restaurant. I used some clippers. The edges don't need to be plain and exact.

Cutting everything to length
Cutting everything to length

Related Posts