HowTo: Modular Gaming Table - Part 4

Ok, we already went through a lot of steps. First we prepared the six basic modules and shaped some with hills and then we started coating everything with our structure paint. Now it's time to adding detail to the whole thing. This part is again not really magical, but you should take care in this process. The most importan thing is that every module must be completely (!!!) dry. We had a kind of "oven" on my balcony on which the modules could dry for a complete summer day.

Drying station for our modules

HowTo: Modular Gaming Table - Part 3

It's terrain thursday (nah just kidding, atm I am in the mood to do so) so I will post another part of my modular gaming table series. After preparing the six basic modules and shaping some with hills it is time to get dirty and put some paint onto our modules. Therefore we mix our own structure paint (the paste/paints you can buy are WAY too expensive). Besides a big bucket (~5l bucket is big enough) we need:

Bucket of PVA/white glue:

Approx. cost:  ~ 8 Euro

Bag of bird grit:

Approx. cost: ~ 90ct

Bottle of brown paint:

Approx. cost: ~ 5 Euro

Pour everything together, in the end we used a mixing ratio of about 1:1:1:1 (water, paint, sand, glue). Just try it out what suits you best. The structure paint should not be too runny and should not be as thick as toothpaste. You should be able to spread it out easily without the paint beeing transparent or only gluing sand...

Applying the structure paint 

HowTo: Modular Gaming Table - Part 2

In the last part of this HowTo series, I explained how I build the base for the gaming modules. In this part I will describe how the hills were made and how I prepared the board to get the first layer of the structure paint.

I suggest you listen to this song while reading the next part:

HowTo: Modular Gaming Table - Part 1

As promised I will do a HowTo-series about how I build my gaming table. The gaming table was build last year, toghether with a close friend of mine and has seen now three battles (one you can in my first battle report). We had enough of playing on a normal dining table. The Citadel board was too expensive for us (since we only play on an irregular base) so we researched a bit and planned our own modular board.
Modular because:

• we wanted a table which looked different when we wanted to
• I have not enough room to store one or three big plates
• and we wanted to save some money :)

So we made a masterplan and went shopping in the local hardware store. After the first tour we replanned everything because we didn't want to spent as much money for material as we would have to pay for the Citadel board... Therefore I will do a Step by Step how the boaard was really build and will give an overview how much the material had roughly cost.